IP 54 SHEET STEEL ENCLOSURE

IP 54 SHEET STEEL ENCLOSURE

Specifications

  • Enclosure is fabricated from Electro-Galvanized (EG) sheet.
  • Gland plates are positioned at top and bottom of the enclosure.
  • The gaskets for the door and gland plates are of soft black neoprene sponge.
  • M6 earth studs are positioned on door and enclosure.
  • Door is fully detachable.
  • IP 54 lock with detachable key.
  • Detachable zinc plated wall mounting backets can be installed either horizontally or vertically.
  • Standard colour for enclosure - Light Grey (RAL 7035).
  • Each enclosure is packed in corrugated paper carton.

Electrostatic Powder Spray Paint
Electrostatic Powder Spray is the standard paint finish. Powder spray gives an excellent coverage with an even overall thickness. Five stage pre-treatment, i.e. degrease, rinse, iron phosphate, rinse and dry, then modified epoxy powder paint is applied before oven curing at 200oC. The standad thickness of paint is 50 microns.

TYPE
ENCL-1
ENCL-2
ENCL-3
ENCL-4
ENCL-5
ENCL-6
ENCLOSURE
DIMENSIONS (mm)

H    W    D
300x300x150
H    W    D
400x300x150
H    W    D
500x400x150
H    W    D
600x400x200
H    W    D
600x500x200
H    W    D
700x500x200
MOUNTING PLATE
DIMENSIONS (mm)

H      W
250x275
H      W
250x275
H      W
250x275
H      W
250x275
H      W
250x275
H      W
250x275
WEIGHT (kg)
5.1
6.3
9.3
12
17.8
20.2
PLATE THICKNESS (mm)
1.2
1.2
1.2
1.2
1.5
1.5
NO. OF LOCKS
1
1
2
2
2
2